产品别名 |
Lithogrease000,DMG润滑脂 |
面向地区 |
辽宁恒润石油化工有限公司是中国的工业化学品进口批发服务商，致力于为客户提供便捷的服务，我司与国外70多家品牌生产商代理商建立长期的战略合作伙伴关系，能够快速帮助客户解决实际问题、并且长期稳定为客户储备库存，节约客户等货时间。涉及行业油：汽车行业、矿山行业、风电行业、纺织行业、石油开采、轨道交通、食品医疗、电子行业、船舶制造与维护保养、航空航天、电机轴承、润滑系统、仪器行业。公司代理经销品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克鲁伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘东兴PENTOSIN、阿维亚AVIA、安润龙ANDEROL、亚拉ARAL、雪弗龙Chevron、赤士顿CHESTERTON、、LE、劳勃抗LUBCON、好富顿HOUGHTON、嘉实多Castrol、魔力大MOLYDAL、罗哥ROCOL、凯密特尔Chemetall、等品牌润滑油、润滑脂、防锈油、磨削液、切削液、锂基脂等。
公司官网：www.ruibolube.con 咨询热线：
Divinol Lithogrease 000（产地：德国）
技术参数：
Divinol Lithogrease 000
NLGI等级：000
稠化剂/基础油：锂复合皂/矿物油/聚α烯烃
Divinol Lithogrease 000温度范围：-30～+140℃
Divinol Lithogrease 000滴点：190℃
Divinol Lithogrease 00040℃时粘度：380
说明：Divinol Lithogrease 000耐水、部分合成液体润滑脂，Divinol Lithogrease 000含有抗极压添加剂，Divinol Lithogrease 000用于润滑承受高机械力和热应力的齿轮箱。Divinol Lithogrease 000适用于机床线性导轨的滚动润滑。
Divinol Lithogrease 000为德马格DMG设备推荐用润滑脂。DMG ID:27078178
DMG ID:27078178,DMG ID:27078178, DMG ID:27078178, DMG ID:27078178, DMG ID:27078178, DMG ID:27078178, DMG ID:27078178, DMG ID:27078178
包装形式：11×1kg
Details:
The uation of the reasons of disturbances reports from Vogel central lubrication systems used in DMG machines has shown that errors can be caused by not filling the systems properly; filling is done too late (too much air gets into the piping system); too much air is filled in together with the grease; the grease boxes are dirty, dirt gets inside the boxes; and not approved greases (not liquid enough) are used. Due to the difficult access to the grease boxes mounted on the machines and because of dirt getting inside when filling them, Zeller+Gmelin has developed a new applicant-friendly plastic tube for refilling.
Divinol Lithogrease 00 and 000, the special greases approved for DMG machines, with identification no. 27 078 178, can now be purchased in 1 kg plastic tubes with re-sealable screw tops. The tubes can be ordered at Neihoff of India as follows: Divinol Lithogrease 00/000 (NLGI class 00 or 000) 1 ltr tube with screw top, packing – 11 tubes in 1 box. When using these tubes, entry of air or dirt can almost completely be excluded. The tubes can be stored without problems due to their screw top. Divinol Lithogrease 00 (NLGI class 00) is mixable with Divinol Lithogrease 000 (NLGI class 000). We recommend using Divinol Lithogrease 000 also in old machines because of its higher liquidity. DMG ID:27078178
DMG ID:27078178,DMG ID:27078178, DMG ID:27078178, DMG ID:27078178, DMG ID:27078178, DMG ID:27078178, DMG ID:27078178, DMG ID:27078178
Divinol Lithogrease 000用于润滑机床直线导轨系统中的滚子。它还可用于高机械负载的齿轮润滑。该产品可在中央润滑系统中轻松泵送。柏林Willy Vogel AG公司获得批准。由于其低一致性，Divinol Lithogrease 000显示出明显更好的流动性，作为NLGI-00级的可比润滑脂。
我们的客户使用该产品对DMG Deckel Maho Gildemeister（现为森精机公司）铣床和车床进行中央润滑。
一管含有一升。
我们只销售新鲜产品，典型的保质期是两年。
>颜色/外观：黄色
>增稠剂：锂复合皂
>工作温度范围：-30°C - + 140°C
> NLGI级/ DIN 51 818：000
>基础油粘度/ 40°C / DIN 51 562：380mm²/ s
>含水量/ DIN 51 777 / T1：
>滴点/ DIN ISO 2176：> 160°C
>工作穿透/ 0.1mm，60双行程/ DIN ISO 2137：460
>工作穿透/ 0.1mm，5000双行程/ DIN ISO 2137：465
>流动压力在-20°C / DIN 51 805：300 hPa
>油分离18h / 40°C / DIN 51 817：5％
>对铜的腐蚀作用24h / 100°C / DIN 51 811：腐蚀程度1
>抗氧化性100°C / 100h / DIN 51 808：0.2 bar
> VKA焊接负载/ DIN 51 350 / T4：2800 N.
Divinol Lithogrease 000 is used for the lubrication of rollers in linear guide systems of machine tools. It can also be used for the lubrication of gears with a high mechanical load. The product is easily pumpable in central lubrication systems. The approval of the company Willy Vogel AG, Berlin is available. Due to its low consistence, Divinol Lithogrease 000 shows a clearly better flow behaviour as a comparable grease of NLGI-class 00.
Our customers use this product in central lubrication of DMG Deckel Maho Gildemeister (now a Mori Seiki company) milling machines and lathes.
One tube contains one liter.
We only sell fresh product and the typical shelf life is two years.
> Colour / Appearance: yellow
> Thickening agent: Lithium complex soap
> Operating temperature range: -30°C - +140°C
> NLGI-class / DIN 51 818: 000
> Base oil viscosity/40°C / DIN 51 562: 380 mm²/s
> Water content / DIN 51 777/T1:
> Dropping point / DIN ISO 2176: > 160 °C
> Worked penetration/0.1mm, 60 double strokes / DIN ISO 2137: 460
> Worked penetration/0.1mm, 5000 double strokes / DIN ISO 2137: 465
> Flow pressure at -20°C / DIN 51 805: 300 hPa
> Oil separation 18h/40°C / DIN 51 817: 5 %
> Corrosion effect on copper 24h/100°C / DIN 51 811: Corrosion degree 1
> Oxidation resistance 100°C/100h / DIN 51 808: 0.2 bar
> VKA welding load / DIN 51 350/T4: 2800 N
Do you have any questions concerning this product?
Further products by Zeller und Gmelin
近期浏览
